Run Your Production Floor on Sunlight
Your machines work hardest in the daytime – the same hours the sun does.
We build on-site solar plants that feed power straight into your factory’s daytime load. Every plant is worked out from your own bills, shift pattern and the shed roof or land you can spare – not from a standard package.
- Sized from your real load
- Metal shed, RCC or ground mount
- Structure checked before work
- Installed around your shifts
- Generation tracking after handover
Why Factories Are Moving to Solar
In most units, the power bill sits right behind raw material and wages. Because a factory draws its heaviest load between morning and evening, panels on its own roof can carry a good part of that demand as it happens, and the meter has less to record.
We look at your sanctioned demand, tariff category and shift timings first, then decide how big the plant should be and where it should sit.
What a Plant Does for Your Unit
Want a rough plant size for your factory? Share your power bill with us.
Every Industry Uses Power Differently
A rice mill, a cold store and a spinning unit each have their own load curve. We plan for yours.
Engineering & Fabrication Units
Compressors, welding sets and CNC machines run all day – a steady load that suits on-site generation well.
Rice & Flour Mills
Hullers, polishers and dryers draw heavy current. Long mill sheds give plenty of roof for panels.
Cold Stores & Aqua Processing
Chillers never switch off, so daytime solar takes a sizeable bite out of a 24-hour load.
Spinning & Garment Units
Shift-based work with lighting, looms and humidifiers running through the day.
Food, Pharma & Chemical Plants
Process heating, pumps and clean-room HVAC, plus buyers who ask about green power.
Godowns & Logistics Sheds
Low daytime use but very large roofs – ideal for net-metered generation.
Five Stages of an Industrial Project
Engineering
Panel layout, mounting structure, inverter rating and cable routes are drawn up and shared with you.
Erection
Work is scheduled in blocks so production carries on, with safety lines on every roof.
Grid Tie-In
Strings, earthing and protection are tested, and the plant is synchronised with your supply.
Aftercare
You get online generation data, and we stay on call for cleaning advice and faults.
Ready for a site visit? Our engineers can survey your shed or land.
Factory Projects in Two States
Our Nellore team travels to industrial estates and mill clusters in both states for surveys and installation.
Unit outside these areas?
Call us anyway – we take up larger projects further afield.
Hear It From the People We Built For
Short clips from owners who now run part of their premises on their own panels.
Owner Story: Mill Rooftop Plant
Owner Story: Factory Shed Plant
Owner Story: Plant Walkthrough
Curious how your own roof would perform?
Tell Us About Your Unit
Not sure whether you need 50 kW or 500 kW?
Fill in the form and an engineer will call to go through your numbers. These three things speed it up:
- Your last few electricity bills
- Sanctioned load and shift timings
- Rough size of the roof or open land
Request a Callback
What Plant Owners Ask Us
The questions that come up on almost every site visit.
How big a plant can my factory install?
That depends on two things: how much power you use and how much shade-free area you have. Roughly 10 square metres of roof carries one kilowatt. We work out both during the survey.
Will an old metal shed take the weight of panels?
Most sheds can, but we check purlin spacing, sheet condition and rust before we commit. If the roof is weak we suggest strengthening or a ground-mounted array instead.
Does installation stop production?
No. The mounting and wiring happen on the roof. The only shutdown is a short one when the plant is connected to your panel, and we plan it on a holiday or between shifts.
How much will we actually save?
It varies with your tariff, working hours and plant size, so we don't quote a fixed figure. After reading your bills we give you an estimate of yearly generation and the units it can replace.
Which areas do you take projects in?
We are based in Nellore and handle industrial work across Andhra Pradesh and Telangana.
Your Roof Is Already Collecting Sunlight
Let us show you how much of it your unit could be using.
Visit Our Nellore Office
Nellore Office
Get a Plant Estimate
Leave your number and location. We’ll call to ask about your load and roof.