Skip to main content

SCR Energy

Industrial Solar Power Plants in Nellore | SCR Energy
Solar Plants for Factories & Mills

Run Your Production Floor on Sunlight

Your machines work hardest in the daytime – the same hours the sun does.

We build on-site solar plants that feed power straight into your factory’s daytime load. Every plant is worked out from your own bills, shift pattern and the shed roof or land you can spare – not from a standard package.

Book a Free Site Survey
Aerial view of a large industrial roof covered with solar panels
  • Sized from your real load
  • Metal shed, RCC or ground mount
  • Structure checked before work
  • Installed around your shifts
  • Generation tracking after handover
Speak to our engineer+91 89773 24076

Why Factories Are Moving to Solar

In most units, the power bill sits right behind raw material and wages. Because a factory draws its heaviest load between morning and evening, panels on its own roof can carry a good part of that demand as it happens, and the meter has less to record.

We look at your sanctioned demand, tariff category and shift timings first, then decide how big the plant should be and where it should sit.

What a Plant Does for Your Unit

Smaller monthly power bills
Output peaks during working hours
Empty shed roofs start earning
Fewer units bought from the grid
Room to add capacity later
Helps meet buyer ESG checks
Few moving parts, little upkeep
Technician installing panels on an industrial rooftop solar plant

Want a rough plant size for your factory? Share your power bill with us.

Sectors We Work With

Every Industry Uses Power Differently

A rice mill, a cold store and a spinning unit each have their own load curve. We plan for yours.

Welder working on metal in a fabrication unit

Engineering & Fabrication Units

Compressors, welding sets and CNC machines run all day – a steady load that suits on-site generation well.

Sacks of rice stacked beside a paddy field

Rice & Flour Mills

Hullers, polishers and dryers draw heavy current. Long mill sheds give plenty of roof for panels.

Frozen fish stacked in a cold storage unit

Cold Stores & Aqua Processing

Chillers never switch off, so daytime solar takes a sizeable bite out of a 24-hour load.

Rows of spinning machines with thread spools

Spinning & Garment Units

Shift-based work with lighting, looms and humidifiers running through the day.

Technician in a lab coat operating a processing machine

Food, Pharma & Chemical Plants

Process heating, pumps and clean-room HVAC, plus buyers who ask about green power.

Large array of solar panels on a warehouse roof

Godowns & Logistics Sheds

Low daytime use but very large roofs – ideal for net-metered generation.

From Survey to Switch-On

Five Stages of an Industrial Project

01

Survey

Engineers visit the unit, read a year of bills and check purlins, sheeting and shading.

02

Engineering

Panel layout, mounting structure, inverter rating and cable routes are drawn up and shared with you.

03

Erection

Work is scheduled in blocks so production carries on, with safety lines on every roof.

04

Grid Tie-In

Strings, earthing and protection are tested, and the plant is synchronised with your supply.

05

Aftercare

You get online generation data, and we stay on call for cleaning advice and faults.

Ready for a site visit? Our engineers can survey your shed or land.

Project Regions

Factory Projects in Two States

Our Nellore team travels to industrial estates and mill clusters in both states for surveys and installation.

SCR

Unit outside these areas?

Call us anyway – we take up larger projects further afield.

On Camera

Hear It From the People We Built For

Short clips from owners who now run part of their premises on their own panels.

Owner Story: Mill Rooftop Plant

Owner Story: Factory Shed Plant

Owner Story: Plant Walkthrough

Curious how your own roof would perform?

Plant Estimate

Tell Us About Your Unit

Not sure whether you need 50 kW or 500 kW?

Fill in the form and an engineer will call to go through your numbers. These three things speed it up:

  • Your last few electricity bills
  • Sanctioned load and shift timings
  • Rough size of the roof or open land
Prefer to call?+91 89773 24076

Request a Callback

Please enter your name.
Please enter a valid 10-digit phone number.
Please enter a valid email address.

An engineer usually calls back within one working day.

Common Questions

What Plant Owners Ask Us

The questions that come up on almost every site visit.

How big a plant can my factory install?

That depends on two things: how much power you use and how much shade-free area you have. Roughly 10 square metres of roof carries one kilowatt. We work out both during the survey.

Will an old metal shed take the weight of panels?

Most sheds can, but we check purlin spacing, sheet condition and rust before we commit. If the roof is weak we suggest strengthening or a ground-mounted array instead.

Does installation stop production?

No. The mounting and wiring happen on the roof. The only shutdown is a short one when the plant is connected to your panel, and we plan it on a holiday or between shifts.

How much will we actually save?

It varies with your tariff, working hours and plant size, so we don't quote a fixed figure. After reading your bills we give you an estimate of yearly generation and the units it can replace.

Which areas do you take projects in?

We are based in Nellore and handle industrial work across Andhra Pradesh and Telangana.

Something we haven’t covered?Send us a photo of your roof and a recent bill – we’ll reply with first thoughts.
Call or WhatsApp+91 89773 24076

Your Roof Is Already Collecting Sunlight

Let us show you how much of it your unit could be using.

Andhra PradeshTelangana
Call the Project Team
Our Location

Visit Our Nellore Office

SCR Energy Solutions, Nellore